Installing The Versarails Slide Assemblies - Dell PowerVault 725N Rack-Installationsanleitung

JO525bk0.book Page 10 Monday, January 27, 2003 12:29 PM
1-10
Rac k I n s t a l l a t i o n G u i d e
Downloaded from www.Manualslib.com
Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange's top
2
and bottom holes to secure the slide assembly to the front vertical rail (see Figure 1-6).
F i g u r e 1 - 6 . I n s t a l l i n g t h e V e r s a R a i l s S l i d e A s s e m b l i e s
slide assemblies (2)
mounting-bracket flange
10-32 x 0.5-inch
flange-head
Phillips screws
(4 per slide
assembly)
At the back of the cabinet, pull back on the mounting-bracket flange until the
3
mounting holes align with their respective holes on the back vertical rail.
Install two 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange's
4
top and bottom holes to secure the slide assembly to the back vertical rail.
Repeat step 1 through step 4 for the remaining slide assembly on the other side of the
5
rack.
Ensure that the slide assemblies are mounted in the same position on each side of the
6
rack.
manuals search engine
front of rack