Medtronic McGRATH MAC Gebrauchsanweisung Seite 14

Device Cleaning
Use the following process to clean the device:
1. Ensure the battery is removed prior to cleaning.
2. Use a quaternary ammonium and isopropyl alcohol wipe (e.g., Sani-
Cloth or equivalent).
3. Clean the device, systematically working from Step 3a through Step
3g (from top to bottom of the device). - Ensure the surfaces remain
thoroughly wet by continuously wiping for 1 minute.
a. Monitor: Ensure the disinfectant wipe gets into the various
grooves around the screen.
b. Monitor Hinge: Rotate the monitor to the upright position. Feed
the disinfectant wipe into the space between the monitor and
handle to ensure effective penetration. Rotate the monitor to its
opposite position and repeat.
c. Battery Bay: Ensure all surfaces of the Battery Bay (with battery
removed) are thoroughly treated with the disinfectant wipe.
Ensure that the joint between the battery module and the
handle is thoroughly treated with the disinfectant wipe.
d. Handle: Ensure all surfaces of the handle are thoroughly treated
with the disinfectant wipe.
e. Clip and Heel Area: Take particular care in ensuring that the small
clip is clean, in particular the internal corner between the clip
and the surrounding plastic body.
f. Camera Stick™: Ensure all surfaces of the camera stick are
thoroughly treated with the disinfectant wipe.
g. Camera Lens: Clean the camera lens with the disinfectant wipe.
Ensure that the interface between the Camera Stick™ and
camera lens is clean.
4. Visually inspect the device for visible soil. If not visually clean, repeat
cleaning from step 3 using a new disinfectant wipe.
Device Intermediate-Level Disinfection
Use the following process to disinfect the device
1. Ensure the battery is removed prior to disinfection.
2. Use quaternary ammonia + isopropyl alcohol wipe (e.g. Super sani-
cloth or equivalent).
14