Parkside PSHL 2 D1 Originalbetriebsanleitung Seite 9

breakages on the welding hel-
met, for example. As a result
of these damages, the welding
helmet is no longer able to
provide effective protection.
In this case, the user should
replace the welding helmet
immediately.
This product cannot be used
„
for overhead welding work
and cutting operations. If this
product is use for overhead
welding or cutting, the molten
metal drops could burn
through the ADF filter and
result in injuries to the user.
If the filter is faulty, the user
„
must stop using the welding
helmet immediately. Slag
splashes can damage the
surface of the filter and cause
injury to the user's skin or
cause other serious accidents.
This product is temperature
„
resistant and hardly inflam-
mable but in case of direct
contact with naked flames or
in case of access to an object
with a high temperature, the
helmet may begin to burn or
melt. Please store and only
use the welding helmet in the
manner described in order to
reduce such risks.
The ADF filter is an electronic
„
product that is not waterproof.
Please ensure it is kept dry
and clean and not stored in
a damp environment.
Improper use can result in
„
injuries to the user and other
types of illnesses.
Please examine the filter prior
„
to each use. As soon as the
function and appearance
seem defective, they must no
longer be used.
The use of the welding helmet
„
is prohibited if the filter flickers
or if the level of darkening
no longer corresponds to
the standard value or there
are other abnormal working
conditions.
Please do not expose this
„
product to unnecessary solar
radiation.
Please only use original spare
„
parts. The use of non-original
parts can cause problems
with regard to the protective
function, serviceability and
degree of product protection.
Exceeding the service life
„
(insufficient protection) –
please check the welding
helmet prior to each use for
damage and durability.
Using eye protection without
„
the filter effect against radia-
tion (damages the eyes) – prior
to each use check whether
Safety instructions
GB 9