Safety And Instructional Decals - Toro CCR Quick Clear 6053 Bedienungsanleitung

Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
Order Part No. 117-9121
1. Cutting/dismemberment hazard, impeller and auger—do
not place your hand in the chute; remove the key and read
the Operator's Manual before performing maintenance.
94-2577
115-5698
Model 38563 only; order Part No. 117-6036
decal94-2577
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—shut off
the engine and wait for
the auger to stop before
leaving the machine.
3. Thrown object
hazard—keep bystanders
away.
4. Explosion hazard—do not
tip the machine.
5. Engine switch—on
Model 38568 only; order Part No. 117-6046
decal115-5698
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—shut off
the engine and wait for
the auger to stop before
leaving the machine.
3. Thrown object
hazard—keep bystanders
away.
4. Explosion hazard—do not
tip the machine.
5. Engine switch—on
4
117-9102
6. Engine switch—off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
the engine-oil level.
117-9103
6. Engine switch—off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
the engine-oil level.
10. Plug the machine in to
power the electric starter.
decal117-9102
decal117-9103