Engaging The Rotor Blades; Disengaging The Rotor Blades - Toro CCR Quick Clear 6053 Bedienungsanleitung

Electric-Start Models
Note:
Use only a UL-listed, 16-gauge extension cord that is recommended for outdoor use and is not longer
than 15 m (50 ft).
WARNING
The electrical cord can become damaged, causing a shock or fire.
Thoroughly inspect the electrical cord before plugging it into a power source. If the cord is
damaged, do not use it to start the machine. Replace or repair the damaged cord immediately.
Contact an Authorized Service Dealer for assistance.
CAUTION
If you leave the machine plugged into a power source, someone can inadvertently start the
machine and injure people or damage property (electric-start models only).
Unplug the power cord whenever you are not starting the machine.

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar
against the handle (Figure
Figure 12
12).
Figure 11
Disengaging the Rotor
Blades
To disengage the rotor blades, release the control bar
(Figure 13).
g219303
10
Figure 13
g257387
g011230