Safety And Instructional Decals - Toro SnowMax 724 ZXR Bedienungsanleitung

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Order Part No. 131-5916
1. Cutting/dismemberment hazard of hand or foot, auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
1. Auger drive—squeeze the lever to engage; release the lever
to disengage.
2. Warning—read the Operator's Manual.
3. Cutting/dismemberment hazard of hand or foot, auger—keep
away from moving parts; keep all guards and shields in place;
shut off the engine and wait for the auger to stop before
leaving the machine; remove the ignition key and read the
instructions before servicing or performing maintenance.
131-5914
Order Part No. 131-5921
decal131-5914
1. Insert the key.
2. Prime the engine 3 times.
3. Engage the choke.
4. Pull the starter cord.
5. Once the engine is running, disengage the choke.
131-1785
4. Thrown object hazard—keep bystanders a safe distance
away from the snowthrower.
5. Self-propel drive—push down on the handle to engage the
self-propel drive.
3
1 2
x 3
3 4
5
120-9805
120-9805
decal120-9805
decal131-1785