Safety And Instructional Decals - Toro Power Max e26 Bedienungsanleitung

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment hazard of hand or foot, impeller
and auger—keep bystanders away.
1. Cutting/dismemberment
hazard of the fingers or
hand, impeller—do not
place your hand in the
chute.
1. Traction drive—squeeze the lever to engage; release the
lever to disengage.
2. Warning—read the Operator's Manual.
3. Cutting/dismemberment hazard of hand, impeller—do not
place your hand in the chute; shut off the motor before leaving
the operating position; use the tool to clear the chute.
121-6817
137-6198
2. Warning—shut off the
motor before using the tool
to clear the chute.
decal121-6817
1. Fast
2. Forward speeds
decal137-6198
121-1240
4. Cutting/dismemberment hazard of hand, impeller—stay away
from moving parts; keep all guards and shields in place;
remove the key and read the Operator's Manual before
performing maintenance.
5. Thrown object hazard—keep bystanders away.
6. Auger/impeller drive—squeeze the lever to engage; release
the lever to disengage.
6
121-6823
3. Slow
4. Reverse speeds
decal121-6823
decal121-1240