General Safety; Safety And Instructional Decals - Toro Powerlite 38274 Bedienungsanleitung

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Read and understand the contents of this
Operator's Manual before you start the engine.
Ensure that everyone using this product knows
how to use it, knows how to shut off the engine
quickly, and understands the warnings.
•
Shut off the engine whenever you leave the
operating position for any reason.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment hazard, impeller;
cutting/dismemberment hazard, auger—do not
place your hand in the chute; remove the key and read the
Operator's Manual before performing maintenance.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, impeller—shut off the engine
and wait for the auger to stop before leaving the machine.
3. Thrown object hazard—keep bystanders away.
117-6047
•
Do not put your hands or feet near moving parts
on the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working.
•
Keep clear of any discharge opening. Keep
bystanders, especially small children, out of the
operating area.
•
Never allow children to operate the machine.
1. Primer
decal117-6047
2. Push the primer 2 times to
prime the engine.
3. Push in the key to switch
the engine on.
117-7713
4. Explosion hazard—do not tip machine forward or backward.
5. To engage the auger, squeeze the control bar.
6. To disengage the auger, release the control bar.
3
120-0149
4. Pull the key to switch the
engine switch off.
5. Remove the key to lock
the machine.
6. Read the Operator's
Manual before checking
the engine-oil level.
decal120-0149
decal117-7713