ATIKA ASP 10-1350 Bedienungsanleitung Sicherheitshinweise Ersatzteile Seite 25

P o s s i b l e p
P o s s i b l e p
Problem
Logs are not being split properly
(insufficient
performance).
Splitting column
unsteadily or
vibrations.
Splitting column does not move
in.
Motor starts, but splitting column
does not move in.
Motor will not start.
Downloaded from www.Manualslib.com
r o b l e m s
r o b l e m s
Possible cause
⇒ The log is not positioned correctly.
splitting
⇒ The
log
dimensions or the wood is too hard for
the performance of the machine.
⇒ Splitting blade does not split log.
⇒ Hydraulic pressure too low.
⇒ Release rods bent (hydraulic tappet not
quite pressed in).
⇒ Incorrect connecting lead (longer than
10 m or too small cable cross-section).
moves ⇒ Air in the circuit.
with strong
⇒ Splitting
lubricated or oiled.
⇒ Hydraulic pump defective.
⇒ Motor turns in wrong direction
⇒ No electrical power.
⇒ 2-phase mode in threephase motor.
⇒ Connection cable defective.
⇒ Electric motor defective.
manuals search engine
Remedy
⇒ Reposition the log correctly.
⇒ Cut the log to the required dimensions.
exceeds the maximum
⇒ Sharpen splitting blade, check for burrs or
⇒ Check the oil level and add more oil if
⇒ Arrange
⇒ Use the correct connecting lead.
⇒ Check the oil level and add more oil if
column not sufficiently
⇒ Lubricate
If the problem cannot be rectified, refer to the
manufacturer or other approved service centre.
⇒ To correct the problem, refer to the
⇒ Check the motor direction
⇒ Check the fuse.
⇒ Have fuse and lead checked by qualified
⇒ Replace the connection cable or have it
⇒ To correct the problem, refer to the
24
notches.
necessary.
If the problem cannot be rectified, refer to the
manufacturer or other approved service centre.
for manufacturer
company to adjust the rods.
necessary.
splitting column
environmentally friendly spray oil.
manufacturer or other approved service centre.
Threephase: adjust the
(s. page 19)
AC: To correct the problem, refer to the manu-
facturer or other approved service centre.
electrician.
checked by an electrician.
manufacturer or other approved service centre.
or authorised
or oil with
motor direction