Storch ProDist smart Handbuch Seite 117

Angle measurement
The inclination sensor measures inclinations of ±
65°.
During inclination measurement, the device must be
held level (± 10°). If the slant value is exceeded, the
angle display is cleared. Level the device again to
continue measuring the inclination.
Press the button once to enable angle measure-
ment. The symbol is shown in the display. The
inclination value is shown top right in the display.
Press the button to measure the inclination and
t h e distance.
The distance (L) is shown in the summary at the bot-
tom. The distances A and B are computed by and
L; they are displayed in the second and third lines
after the angle value at the top.
117