Storch ProDist smart Handbuch Seite 101

The laser distance measuring device has the following
label
The label (laser outlet) marks the point at which the digital
laser distance measuring device generates its laser light.
When using the device, you need to know where the laser
light is emitted. Make sure that all users are aware of the
dangers related to direct eye contact with the laser beam.
• Do not remove or modify any of the product labels.
• The digital laser distance measuring device is not a toy.
Always keep it out of the reach of children. The laser light
generated by this device must not be pointed at persons or
animals.
• Do not use the device in the presence of children or allow
children to operate the device.
• Never position the device so that a person can delibera-
tely or inadvertently look into the laser beam.
• Do not use the device on shiny or reflective surfaces such
as sheet steel. The reflective surface could direct the beam
back towards the operator.
• Always switch off the device when it is not in use. Lea-
ving the device switched on increases the risk of a person
inadvertently looking into the laser beam.
• Never attempt to repair or disassemble the device. If
unqualified persons attempt to repair this device, the
consequence could be serious injuries. Any repair worked
required on the laser measuring device must be performed
by STORCH's authorised after-sales service.
101