Safety Instructions - Storch ProDist smart Handbuch

Safety instructions

The device uses a voltage range that can pose a hazard
for humans and animals. The device must only be ope-
ned and/or disassembled by authorised persons. Similarly,
maintenance and repairs must be performed by a qualified
electrician or an authorised repair shop. The owner/opera-
tor operates the device on their own liability and at their
risk.
Before using the device, read and make sure you under-
stand all the instructions in this manual. Failure to obser-
ve instructions can cause a risk of laser radiation
hazard, electric shock and/or physical injury.
CAUTION: Never attempt to modify the function
of the device in any way. This can lead to haza-
rdous laser radiation.
LASER BEAM. Never look into the beam. Laser
class 2 device. Only switch on the laser beam
when you are using the device. The laser switches
off automatically after 30 seconds. To switch off
the laser manually, tap the
Improper execution of operational procedures or
the use of operating and adjusting elements in a
way other than that specified in this manual can
result in hazardous exposure to radiation.
The use of optical instruments such as telescopes to view
the laser beam aggravates its potential for eye damage.
The device is equipped with an integrated laser. This
is a class 2 laser with a maximum output of 1 mW and
a wavelength of 635 nm. This type of laser will not nor-
mally cause any eye damage. But you should still not look
directly into the beam as this can cause flash blindness.
100
button.