Storch ProDist smart Handbuch Seite 114

Bluetooth/Sending measurement results
Switching Bluetooth on
Hold down the button until the sym-
bol appears in the display. The Bluetooth interface
is now on; the laser measuring device can be con-
nected to your smartphone or tablet using the free
„STORCH ProDist" app.
When you set up the first Bluetooth connection bet-
ween the laser measuring device and your smart-
phone/tablet, you are prompted to enter a PIN. In
this case, please enter 0000 (four zeroes). The con-
nection is then automatically set up.
Switching Bluetooth off
Hold down the button until the symbol is
no longer visible in the display.
Mark measurement
You can enter two dimensions (a and b) in the laser
measuring device to be able to define specific, fixed
distances. This is used in drywall construction, for
example, to be able to install upright C-profiles at
specific distances to one another.
Entering mark distances
Hold down the button until the symbol
appears in the display. The „a value", which you
need to enter first, flashes in the display. . Using
+ -
the and buttons, you can now individually
114