Installing/Removing Main Memory - Fujitsu D2610 Handbuch

Brief description of the mainboard

Installing/removing main memory

Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available on
the Internet at: "www.fujitsu-siemens.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered 1.8 V memory modules without ECC.
DDR2-memory modules must meet the PC2-4200U, PC2-5300U or
PC2-3200U specification.
With a memory configuration of 4 Gbytes the visible and usable main memory can
be reduced down to 3 Gbytes (depending on the system configuration).
The installation/removal is described in the "Basic information on mainboard" manual.
4 - English
DDR2 400/533/667 unbuffered DIMM modules 240-Pin; 1.8V; 64Bit
256 Mbytes to 4 Gbyte
256, 512, 1024 or 2048 Mbyte for one module
A26361-D2610-Z110-1-8N19, edition 1