Fujitsu D2610 Handbuch Seite 13

Brief description of the mainboard
Information about boards
Be sure to observe the following for boards with ESD:
• You must always discharge static build up (e.g. by touching a grounded object)
before working.
• The equipment and tools you use must be free of static charges.
• Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
• Always hold boards by their edges.
• Never touch pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard is equipped with or supports special features.
This manual describes the most important properties of this mainboard.
Additional information on mainboards is contained in the "Basic information on mainboard" manual
on the "User Documentation" or "OEM Mainboard" CDs, or on the Internet.
Ports and connectors
The location of the ports and connectors of your mainboard is specified at the beginning of the manual.
The components and connectors marked are not necessarily present on the mainboard.
External ports
The location of the external ports of your mainboard is specified at the beginning of the manual.
PS/2 keyboard port, purple (optional)
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
The external USB ports on the back may be loaded with up to max. 2A in total.
A26361-D2610-Z110-1-8N19, edition 1
Brief description of the mainboard
PS/2 mouse port, green (optional)
Microphone jack, pink
USB – Universal Serial Bus, black
VGA, blue
English - 1