Installing/Removing Main Memory - Fujitsu D3120 Kurzanleitung

6 - English

Installing/removing main memory

Technical data
Technology
Total size
Module size
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered DDR3 memory modules without ECC.
DDR3 memory modules must comply with the PC3-10600 or PC3-12800 specification.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
Depending on how the system is configured, the visible main memory can be reduced.
Channel A, Slot 1
Channel B, Slot 2
Slot to be used
Channel A, slot 1
Channel B, slot 2
The installation/removal is described in the "Basic information on mainboard" manual.
18
DDR3 1333 / 1600 MHz unbuffered DIMM modules 240 pin; 1.5 V;
64 bit, no ECC
1 to 16 Gbyte DDR3
1, 2, 4 or 8 GByte for one module
Installing/removing main memory
Number of memory modules inserted
1
x
2
x
x
Fujitsu