Installing/Removing Main Memory - Fujitsu D3433 Handbuch

Installing/removing main memory

Installing/removing main memory
Technical data
Technology
Total size
Module size
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
Only unbuffered DDR4 memory modules without ECC may be used.
DDR4 memory modules must comply with the DDR4-1866 or DDR4-2133 specification.
DDR4-2133 modules are downward compatible and are operated depending on the CPU.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
Depending on how the system is configured, the visible main memory can be reduced.
Channel A, Slot 1
Channel B, Slot 1
Slot to be used
Channel A, slot 1
Channel B, Slot 1
The installation/removal is described in the "Basic information on mainboard" manual.
Fujitsu
DDR4 1866 / 2133 MHz SO-DIMM modules 260 pin; 1.2V; 64 bit,
no ECC
2 to 32 GB DDR4
2, 4, 8 or 16 GB per module
Number of memory modules inserted
1
x
English - 7
2
x
x
21