Frequently Asked Questions - K-FEE Lattensia Betriebsanleitung

Rinse button flashing red?
Wrong position of rotary switch. When switching the machine on, the rotary switch must be in the
"drink dispensing" position.
Quick flashing of rinse button and another button?
Switch off and disconnect appliance from mains, allow to cool down. Then reconnect and switch on
appliance again. Contact service centre if error recurs.
Rinse button flashes red while dispensing drink?
Descale the machine.
Drink not dispensed properly?
Press the lever down completely. If necessary, clean and descale the machine.
In case that the water tank ran empty during beverage dispensing, please open and close the lever,
in order to eject the capsule. Fill the water tank and rinse system until water comes out of the spout.
Drink dispensing is delayed?
Appliance is re-heating.
Is the spent capsule container overfull and jammed?
Try to disengage the spent capsule container by gently shaking it.
After inserting a capsule, the lever cannot be closed completely?
Check that there is no used capsule in the brewing chamber, that the container for used capsules is
not overfull and that the newly inserted capsule is in the correct position.
Is the beverage not hot enough?
If necessary, descale the machine.
Downloaded from www.Manualslib.com manuals search engine
Frequently Asked
EN
Questions
The appliance
only work with drinks
capsules of those
brands carrying the K-fee® Sys-
tem logo.
The use of non-original cap-
sules can involve the following
risks: risk to health, damage to
the machine and the possible
loss of warranty rights.
will
71