Rinsing The Milk Foaming Unit - K-FEE Lattensia Betriebsanleitung

Rinsing the milk
EN
foaming unit
For quick cleaning and
to prevent milk resi-
due drying in the milk
foaming unit rinse it with water
after every use.
Risk of scalding!
Very hot steam and
hot water.
Risk of clogging!
If the milk foam-
ing unit is not used
within 5 minutes following the
last use it has to be cleaned
thoroughly. To do that the milk
foaming unit has to be taken
apart and the parts cleaned so
that no milk residue remains
and dries on.
58
Downloaded from www.Manualslib.com
1
Place a container un-
der the milk foaming
unit.
4
Turn the rotary switch
back to drink dis-
pensing. Empty the
container.
manuals search engine
2
Immerse the suction Optional: fill cold wa-
hose in a container ter into cleaned milk
with cold water. container.
WARNING
The milk foaming unit must be cleaned regularly to ensure that it
functions properly. For this purpose please take note of the clean-
ing recommendations in these operating instructions (p. 58 – 61). Please
be aware that the milk foaming unit contains parts which are subject to
wear (air intake nozzle and milk suction hose) over time. Depending on
the usage and cleaning pattern this can lead to a situation where only very
little or no milk can be frothed up. Should you need replacement parts
please contact our customer service (p. 73).
3
Turn the rotary switch
to milk frothing. The
rinsing process starts.