K-FEE Lattensia Betriebsanleitung Seite 50

Startup (continued)
EN
Risk of scalding!
Very hot steam and
hot water.
When the machine is
ready, all buttons light
up white - except the
On/Off button.
When the machine
is switched on, the
rotary switch must be
set to "drink dispensing". If
this is not the case, the rinse
button will very quickly start to
flash red.
50
Downloaded from www.Manualslib.com
9
Wait until rinsing pro-
cess has finished. Then
empty the container.
12
Turn the rotary switch
to milk frothing. The
rinsing process starts.
manuals search engine
10 11
Place a container under Immerse the end of
the milk foaming unit. the suction hose into a
second container with
approx. 250 ml of cold
water.
13 14
Wait until the milk Turn the rotary switch
container is empty. back to drink dispens-
ing. Empty the full
container.
Optional: fill milk
container with approx.
250 ml of cold water
and connect to milk
foaming unit.
15
The appliance is ready
for operation.