Cleaning The Milk Foaming Unit Following Its Last Use - K-FEE Lattensia Betriebsanleitung

1
Allow the milk foaming
unit to cool down and
then remove it from
the steam outlet.
4
Assemble the milk
foaming unit and push
it on to the steam
outlet.
Downloaded from www.Manualslib.com
2
Take the milk foaming unit apart as illustrated.
If the milk foaming unit is not used within 5 minutes following
the last use it has to be cleaned thoroughly. To do that the milk
foaming unit has to be taken apart and the parts cleaned so that
no milk residue remains and dries on.
WARNING
The milk foaming unit must be cleaned regularly to ensure that it
functions properly. For this purpose please take note of the clean-
ing recommendations in these operating instructions (p. 58 – 61). Please be
aware that the milk foaming unit contains parts which are subject to wear
(air intake nozzle and milk suction hose) over time. Depending on the us-
age and cleaning pattern this can lead to a situation where only very little
or no milk can be frothed up. Should you need replacement parts please
contact our customer service (p. 73).
manuals search engine
Cleaning the milk
3
foaming unit follow-
ing its last use
after every use because it is
difficult to remove milk resi-
Thoroughly rinse the
dues. First place the parts into
parts with hot water hot water in order to soften the
and allow to dry indi- milk residues.
vidually before assem-
bling them.
each disassembly and attach it
to the steam outlet. All parts of
the milk foaming unit have to
be firmly put together again so
that it functions properly.
EN
We recommend this
thorough cleaning of
the milk foaming unit
Reassemble the milk
foaming unit again
carefully following
59