Startup - K-FEE Lattensia Betriebsanleitung

1
Before starting up the
machine, check the
voltage on the type
plate (see underside of
machine).
5
Re-insert the water
tank.
Downloaded from www.Manualslib.com
2 3
Insert the milk foam- Take out the water
ing unit on the steam tank.
outlet.
6 7
On
Switch the machine Close the lever
on. completely. Place a
container under the
The rotary switch
spout.
must be set to "drink
dispensing".
manuals search engine

Startup

4
chine (p. 40 – 44).
Fill the tank with fresh
wait at least 3 hours before
water.
switching it on so that it can
warm up to room temperature.
When the machine is frozen or
very cold it is possible that it
does not function properly.
8
cles. To do that, press the rinse
button once the previous rins-
Press rinse button. The
ing process has been complet-
rinsing process starts.
ed. When using a water filter,
please read the instructions on
page 51.
EN
Read the safety in-
structions before
starting up the ma-
If the machine was ex-
posed to temperatures
below freezing, please
Risk of scalding!
Very hot water.
Before using the ma-
chine for the first
time, run 4 rinsing cy-
49