Before use: Check the product for damage. If the
product is damaged, do not use it.
Do not expose the product to moisture. Otherwise the
product could be damaged.
Unauthorized conversion and/or modification of the
product is not allowed for reasons of safety.
Care should be taken while handling warmer/hot,
acidic, and alkaline liquids.
Wear suitable personal protective equipment (safety
gloves, goggles, apron).
Only measure in well-ventilated environments.
Do not turn on the product immediately after it has
been taken from a cold into a warm environment. The
condensation that forms might destroy your product.
Allow the product to reach ambient temperature
before switching it on.
GB
13