Display Backlight; Battery Display - Parkside PPHM 14 A1 Bedienungs- Und Sicherheitshinweise

NOTES:
The product is equipped with an automatic
temperature compensation function for warmer liquids.
Care should be taken while handling warmer liquids.
Measurements in hot liquids can cause the electrode
probe 1 to wear much faster. Risk of product damage
or malfunction.
˜ Display backlight
Turning the light on/off: Press and hold CAL/HOLD
4 for about 3 seconds.
NOTE: The display backlight cannot be turned on
under temperature measurement mode.
˜ Battery display
When the battery charge status is low,
shown in the display 6 .
10 is
GB 39