Before First Use; Operation - Silvercrest STK 650 B2 Bedienungsanleitung

Before first use
■ Remove all packaging materials from the appliance.
Rinse out all parts of the brewing system (brewing chamber 0, riser pipe q,
■
sieve w) and the jug 3 carefully (see section "Cleaning and care").
Before first use, proceed as follows:
1) Remove the jug 3 from the base 5.
2) Fill the jug 3 up to the MAX mark and add a teaspoon of lemon juice (or
lemon juice concentrate). If you have no lemon, you can add a teabag (or
a teaspoon of loose leaf tea) directly to the water.
3) Insert the brewing system into the jug 3.
4) Close the lid 1 and place the jug 3 on the base 5.
5) Switch the appliance on with the On/Off switch 8. The control lamp 4
and the On/Off switch 8 light up. Wait until the control lamp 4 goes off.
6) Switch off the appliance using the On/Off switch 8 and clean the
appliance as described in "Cleaning and care".
The tea maker is now ready for use.

Operation

CAUTION! PROPERTY DAMAGE!
► Do not add any sugar to the tea maker. Do not heat any milk or alcohol in
the tea maker. This will irreparably damage the appliance.
NOTE
► Green tea is not suitable for brewing in the tea maker. The ideal brewing
temperature for green tea is around 70 °C. At higher brewing temperatures,
such as those used by the tea maker, tannins are released. This makes the
tea taste bitter.
1) Remove the jug 3 from the base 5.
2) Open the lid 1 and remove the brewing system. Place the brewing system
on a level system.
3) Add the required amount of water to the jug 3. Never fill water to more
than the MAX marking or less than the MIN marking.
DANGER! ELECTRIC SHOCK!
To prevent scalds and electric shocks, ensure that the water in the jug 3
►
never overflows.
GB │ IE │ NI │ CY
│
■ 6 STK 650 B2