Herunterladen Inhalt Inhalt Diese Seite drucken

Overheating Protection; Cleaning And Care - Silvercrest STK 650 B2 Bedienungsanleitung

Elektrischer teekocher
Vorschau ausblenden Andere Handbücher für STK 650 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Overheating protection

If the appliance overheats, the overheat protection automatically switches off the
heating element inside the appliance. The On/Off switch 8 remains lit, but the
appliance no longer heats up.
The overheating protection is activated if the appliance is switched on if the
jug 3 contains no or not enough water.
If the overheating protection has switched the heating element off, please
proceed as follows:
Allow the appliance to cool down.
Press the reset button 6 on the bottom of the jug 3. The appliance can
now be used again.

Cleaning and care

DANGER! ELECTRIC SHOCK!
Always remove the plug before cleaning the appliance. There is a risk of
electric shock! Allow the appliance to cool down. Risk of burns!
Never immerse the appliance in water or other liquids. There is a risk of
electric shock! The appliance may be irreparably damaged.
To achieve the best tea-brewing result every time, the appliance should always
be cleaned after use. This prevents:
the combination of limescale and tannins, caused by boiling water and
brewing tea, from affecting the functioning of the tea maker;
the jug from taking on the flavour of particularly aromatic teas and
affecting other varieties of tea if the tea maker is used regularly.
Clean the jug 3 of the tea maker with a damp cloth. Add a little mild
detergent to the cloth to remove stubborn dirt. Rinse out the jug 3
afterwards with plenty of clean water to remove any detergent residue. You
can clean the recess on the bottom of the jug 3 well with a washing up
brush.
CAUTION! PROPERTY DAMAGE!
Do not use abrasive, chemical or caustic cleaning agents. These can
irreparably damage the appliance!
Clean the brewing system with hot water and washing-up liquid:
The brewing chamber 0 and the sieve w can be cleaned with a washing
up brush. Clean the riser pipe q using the riser pipe brush 9. Rinse the
entire brewing system after cleaning with clear water to ensure that no
detergent residues remain.
GB │ IE │ NI │ CY
8 
STK 650 B2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis