Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch PDO 6 Originalbetriebsanleitung

OBJ_BUCH-308-003.book Page 12 Monday, February 4, 2013 4:06 PM
12 | English

Product Description and Specifications

Intended Use

The measuring tool is intended for the detection of metals (ferrous and
non-ferrous metals, e.g., rebar) and "live" wires/conductors in walls, ceil-
ings and floors.

Product Features

The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 On/Off button
5 Sensor area
6 Battery lid
7 Latch of battery lid
The accessories illustrated or described are not included as standard delivery.
Display Elements
a Battery low indicator
b "Live" wire indicator
c Measuring indicator
d "AutoCal" calibration indicator

Technical Data

Digital Detector
Article number
Maximum scanning depth*:
– Ferrous metals
– Non-ferrous metals (copper pipe)
– Copper conductors (live)**
Automatic switch-off after approx.
* depends on material and size of objects as well as material and condition of structure
** less scanning depth for wires/conductors that are not "live"
 In terms of accuracy, the measuring result can be inferior in case of unfavour-
able surface quality of the base material.
1 619 929 L93 | (4.2.13)
PDO 6
3 603 K10 100
60 mm
50 mm
30 mm
10 min
Bosch Power Tools