Österreich; Entsorgung; English; Safety Instructions - Bosch D-tect 150 Professional Originalbetriebsanleitung

14 | English

bei Fragen zu unseren Produkten und deren Zubehör.
www.powertool-portal.de, das Internetportal für Handwer-
ker und Heimwerker.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typen-
schild des Produkts an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.de können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040460
Fax: (0711) 40040461
E-Mail: Servicezentrum.Elektrowerkzeuge@de.bosch.com
Anwendungsberatung:
Tel.: (0711) 40040460
Fax: (0711) 40040462
E-Mail: kundenberatung.ew@de.bosch.com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile bestel-
len.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: Aftersales.Service@de.bosch.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com

Entsorgung

Messwerkzeuge, Akkus/Batterien, Zubehör und Verpackun-
gen sollen einer umweltgerechten Wiederverwertung zuge-
führt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien
nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen
nicht mehr gebrauchsfähige Messwerkzeuge und gemäß der
europäischen Richtlinie 2006/66/EG müssen defekte oder
verbrauchte Akkus/Batterien getrennt gesammelt und einer
umweltgerechten Wiederverwendung zugeführt werden.
1 609 92A 4G0 | (22.08.2018)
English

Safety instructions

All instructions must be read and observed.
The safeguards integrated into the measur-
ing tool may be compromised if the measur-
ing tool is not used in accordance with these
instructions. STORE THESE INSTRUCTIONS IN A SAFE
PLACE.
Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This
will ensure that the safety of the measuring tool is main-
tained.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
The measuring tool may not be 100 % accurate for
u
technological reasons. To eliminate hazards, familiar-
ise yourself with further sources of information, such
as building plans and photographs taken during con-
struction, etc. before carrying out any drilling, sawing
or routing work on walls, ceilings or floors. The accur-
acy of the measuring tool may be affected by environ-
mental influences, such the level of humidity or there be-
ing other electronic devices nearby. The structure and
condition of the walls (e.g. damp, building materials con-
taining metal, electrically conductive wallpaper, insulat-
ing materials, tiles) and the number, type, size and posi-
tion of the objects may distort the measuring results.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The measuring tool is intended for the detection of objects in
walls, ceilings and floors. Depending on the material and
condition of the base material, it is possible to detect metal
objects, wooden beams, plastic pipes, conductors and
cables. The permitted drilling depth to the nearest edge of
each of the detected objects is determined.
The measuring tool complies with the limits specified in
EN 302435. On this basis, clarification is required as to
whether the measuring tool can be used in places such as
hospitals, nuclear power plants and in the vicinity of airports
and mobile phone base stations.
The measuring tool is suitable for indoor and outdoor use.
Bosch Power Tools