Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting programs
Navigate to the programs menu point in the Homescreen. By pressing the OK button you can reach the submenu.
Infrared:
Here you can select one of the following infrared programs:
o
Off
o
Relaxation
o
Warm up
o
Short endurance
o
Long endurance
Colour light:
This enables you to make the following settings:
o
Mode (manual/automatic):
•
Manual:
the settings made in the colour light (colour) menu are adopted and executed by the S&L system.
•
Automatic:
the colour is changed automatically according to the set times.
o
Colour duration (minutes, settable from 1 to 20)
o
Colour blending time (seconds, settable from 1 to 20)
General settings/configurations
Via a long press of the C button 2 you reach the configuration menu of the wave.com4 touch operating unit.
•
General
o
Date/time
o
Display brightness factory setting 10
o
Menu language factory setting German
o
Feedback factory setting on
o
Auto main window time factory setting 10
•
Technicians (only for specialist personnel for installation of the complete system)
Setting date/time
The navigation bar automatically jumps to the next line when the OK button (3) is pressed.
Navigate to the date/time menu point. By pressing the OK button 3 you reach the settings. The line with a blue
background can be set. You can set the hours, minutes and seconds or date with the touch wheel 4. Confirm
your selection with the OK button 3.
Downloaded from
www.Manualslib.com
Operating instructions for the user
WE DO IT FIRST.
manuals search engine
p. 17/20
EN
Werbung
Kapitel
Inhaltsverzeichnis
