Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description of options in the technicians' menu
The respective points are shown or hidden according to which modules or power elements are connected.
According to which settings are made in the technicians' menu, individual menu points are shown or hid
den.
The factory settings are written in bold.
Option wave.com4 sauna control
• Vaporiser
• Fan
• Bench sensor
• Function Res5 Wm
Also heed the information in the instructions for use and installation of the wave.com4 sauna control.
Infrared option
• Fan
• Switch outlet 1
• Switch outlet 2
•
Remote start
Cabin light option
Here you can select via which module (wave.com4 basic with/without moisture module or wave.com4 Infra)
you obtain the cabin light.
o
SAN
o
INF
Option Max. lifespan:
Here you can change the maximum lifespan.
o
6h
o
12h
•
Factory settings: long press on OK3.
Here you can attribute the wave.com4 touch operating unit to its software delivery status. Switch the device off
and on again after confirming this option.führen.
Downloaded from
www.Manualslib.com
Assembling Instructions for Specialist Staff Only
Off/On
Deactivates the vaporiser outlet when the add-on board is connected
(WC4-H-PCB) and hides the menu point 'Moisture' in the homescreen.
Off/On
Activates the fan outlet on the wave.com4 sauna control basic module.
The fan outlet of the wave.com4 Infra is then automatically deactivated.
Off/On
(Water deficiency function vaporiser)/Rs (remote start). Activates the
remote start on wave.com4 sauna control basic module. The water
deficiency recognition is then no longer available. The remote start
inlet of the wave.com4 Infra is then automatically deactivated.
Off/On
Activates the fan outlet on the wave.com4 Infra. The fan outlet of the
wave.com4 sauna control basic module is then automatically deactiva
ted.
Off/On
Activates the potential-free OPT1 outlet. This automatically switches off
upon changing to stand-by mode.
Off/On
Activates the potential-free OPT2 outlet. This automatically switches off
upon changing to stand-by mode.
Off/On;
Activates the remote start inlet on the wave.com4 Infra. The remote
start inlet of the wave.com4 sauna control basic module is then
automatically deactivated. Heed the information in the instructions for
use and installation of the wave.com4 Infra.
(wave.com4 Basic (or basic with moisture add-on))
(wave.com4 Infra)
(according to standard EN 60335-2-53 and EN 60335-1 maximum operating period in non-com
mercial sector)
(according to standard EN 60335-2-53 and EN 60335-1 maximum operating period in commer
cial sector)
WE DO IT FIRST.
manuals search engine
p. 11/20
EN
Werbung
Kapitel
Inhaltsverzeichnis
