Cleaning; Disposal; Maintenance - lumithera VALEDA Bedienungsanleitung

Pressing the "Information" button will display key system information including treatment
credits remaining, maintenance dates and so ware versions (Figure 26).
FIGURE 26

12. Cleaning

• The patient light aperture may be cleaned with a lens cleaning cloth or optical glass cleaner.
• Patient contact areas may be cleaned with isopropyl alcohol wipes.
• The exterior of Valeda, not including the patient light aperture, may be cleaned with a mild soap
solution.
• Do not spray or spill any fluid onto the unit. Use a damp or dry cloth for cleaning.
• Contact LumiThera if the light aperture appears contaminated.

13. Disposal

Protective Barrier Disposal
Follow your practice's procedure, industry guidelines or government regulations applicable to the
disposal of protective barriers.
System
Disposal of electronic equipment may be regulated in your community. Follow local regulations for
disposal of electronic equipment.

14. Maintenance

• Each Valeda has been manufactured to specification.
• Operator maintenance is not required.
• All service and maintenance will be provided by LumiThera.
• If there is a problem, or it is suspected that Valeda requires maintenance, contact LumiThera.
CAUTION – Do not attempt to disassemble the system.
There are no operator serviceable or repairable components. Do not attempt to take the assembly
apart.
20