Silvercrest SHFR 1450 A1 Bedienungsanleitung Seite 13

–
Fill the cooking container 2 with the food you want to cook . Do not
exceed the MAX marking in the cooking container 2 .
–
If required, sprinkle a suitable cooking oil evenly over the food . To do
this, use the measuring cup w and do not exceed the MAX marking on
the measuring cup w (35 ml) .
■ If you want to use the cooking grill 0:
–
Remove the stirrer 3 and the stand q (if present) from the cooking
container 2 .
–
Place the cooking grill 0 centrally in the cooking container 2 and
place the food on the cooking grill 0 .
–
Select the programme "Manual 3"
element only and not the stirring function .
5) Close the lid 1 .
6) Choose a suitable programme, as described in the section Before first use .
Press the ON/OFF button 7 to start immediately or adjust the time and
temperature according to your needs:
–
Press the SET button 6; the time display flashes .
–
Use the arrow buttons ▲ ▼ 9 to set a suitable time .
–
Press the SET button 6 again and the temperature display
–
Use the arrow buttons ▲ ▼ 9 to set a suitable temperature .
NOTE
► The possible setting range for temperature and time varies depending on
the programme . See the table in the section Programmes .
7) Press the ON/OFF button 7 to start the cooking process . The display 8
lights up white during operation .
Depending on the programme, the heating elements, the stirrer 3 and
ventilation start working .
NOTE
► The upper heating element may switch off occasionally during use . This
means that the temperature required for the cooking processing has been
reached . After a short time, the heating element switches back on and
resumes heating .
8) When the programme is completed, you will hear ten beeps and the display 8
lights up blue . The appliance is back in standby mode . The ventilation in the
lid 1 runs on for a while to cool down the appliance .
│ GB │ IE │ NI │ CY
■ 10
: this uses the upper heating
SHFR 1450 A1
flashes .