Mounting The Positioner - Gemü 1435 ePos Kurzanleitung

2.1.3

Mounting the positioner

1 Mounting bracket
2 Actuator
3 Travel sensor
4 Hexagonal nut
5 M6 screws
6 M12 cable gland
7 M4 screws
1. For control function 1 (normally closed), insert mounting bracket 1 between actuator
head 2 and travel sensor 3 and fix by screwing the travel sensor at the hexagonal nut 4.
2. For control function 2 (normally open) and control function 3 (double acting) insert
mounting bracket 1 between threaded adapter and travel sensor 3 and additionally insert
a sealing disc. Fix the assembly by screwing the travel sensor at the hexagonal nut 4.
3. Mount positioner onto mounting bracket 1 using two M6 screws 5.
4. Unscrew screws 7 of cover and open it.
5. Insert linear travel sensor cable through M12 cable gland 6 of positioner and connect to
terminal board acc. to the wiring diagram (see chapter 4).
6. Tighten the M12 cable gland. The cable must be firmly held on all sides.
1435 ePos
Downloaded from www.Manualslib.com
7
6
®
manuals search engine
5
1
2
14 / 24
3
4