Assembling The Travel Sensor; Mounting The Positioner; Mounting The External Travel; Remote Mounting) - Gemü cPos 1436 eco Original Kurzanleitung

2.1.3

Mounting the positioner

1
2
3
Valve with positioner
Assemble the travel sensor (see chapter
2.1.2 "Assembling of the travel sensor").
Mount the positioner 1 by screwing the
G
travel sensor hexagonal nut SW27 2 into
the actuator 3.
The positioner must not be
fi xed by turning the housing as
this may result in the danger of
overturning the internal stop.
If correctly mounted to the valve, the
positioner can be aligned.
eco
OPEN
ERROR
CLOSED
POWER
SW27
Positioner and
actuator
1
eco
OPEN
ERROR
CLOSED
POWER
2
3
Positioner mounted to
the actuator
2.1.4

Mounting the external travel

sensor (only for version with
remote mounting) g)
4
3
Valve with external travel sensor
Fix the positioner 1 at a suitable location.
The mounting bracket GEMÜ
1446 00 ZMP can be used
for this purpose (it must be
ordered separately).
Assemble the travel sensor (see chapter

2.1.2 "Assembling the travel sensor").

Mount the travel sensor 4 by screwing the
G
travel sensor hexagonal nut SW27 4 into
the actuator 3.
Travel sensor and actuator
Travel sensor mounted to the actuator
11 / 20
1
SW27
1436 cPos eco
4
3