Mounting The External Travel Sensor (Only For Version With Remote Mounting); Mounting The Positioner Using A Mounting Bracket - Gemü 1434 mPos Original Einbau- Und Montageanleitung

3.3 Mounting the external travel
sensor (only for version with
remote mounting)
4
3
Valve with external travel sensor
Fix positioner 1 at a suitable location.
The GEMÜ 1446 00 ZMP
mounting bracket (to be ordered
separately) can be used to do
this.
Assemble the travel sensor (see chapter
3.1 "Assembling the travel sensor").
Mount travel sensor 4 to actuator 3 and
G
fi x it to travel sensor 4 using a suitable
open-end wrench SW27.
SW27
Travel sensor and actuator
Travel sensor mounted on actuator
All manuals and user guides at all-guides.com
1
4
3
3.4 Mounting the positioner using
a mounting bracket
The positioner is mounted with a
mounting bracket when valves are
used which have larger position
changes than the integrated travel
sensor on the positioner can detect.
4
3
Valve with mounting bracket
Assemble the travel sensor (see chapter
3.1 "Assembling the travel sensor").
Place mounting bracket 5 with travel
sensor 4 on actuator 3 and fi x it to travel
sensor 4 using a suitable open-end
wrench SW27.
Fix positioner 1 to mounting bracket 5.
4
3
23 / 32
1
5
5 1
1434 µPos