Adjusting The Waiting Period Of The Screensaver - G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung

1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on Configuration
3. Click on the tab
4. Click on the tab
local workstation (on the
Click on the tab
remote workstation (on the
5. In the USB auto refresh
lowing options:
Only faulty devices
All devices
Off
6. Click on Save

Adjusting the waiting period of the screensaver

The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
NOTE: This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
.
KVM extender
.
.
General
if you want to change this setting of the
CPU
CPU module).
if you want to change this setting of the
CON
CON module).
field of the Configuration
 The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (default setting).
 All USB devices are reinitialised regularly.
 The connected USB input devices do not need 
to be reinitialised.
.
Configuration
section, select one of the fol-
G&D DP-Vision-IP-Fiber · 54