Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Establishing a KVM-over-IP™ connection for the first time
Configuring the network interface
How to configure the network interface:
1. Use the remote hotkey
2. Select the entry
3. Select the entry
4. Enter the following data under
Operational
mode:
IP address:
Netmask:
5. Press
to save your settings.
F2
Configuring the global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the remote hotkey
2. Select the entry
3. Select the entry
17 · G&D DP-Vision-IP-Fiber
Ctrl
+
Num
to open the OSD of computer module.
Network setup
and press
Interfaces
and press
Interface A
Press
to select the operational mode of the interface:
F8
Static:
A static IP address is assigned.
IP address is obtained from a DHCP server.
DHCP:
Enter the IP address of the interface.
The operational mode DHCP does not allow making entries.
Enter the netmask of the network.
The operational mode DHCP does not allow making entries.
Ctrl
+
Num
to open the OSD of computer module.
Network setup
and press
Interfaces
and press
Enter
.
Enter
.
:
Enter
.
Enter
.
Werbung
Kapitel
Inhaltsverzeichnis
