1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. Click on the tab
the local workstation (on the
Click on the tab
the remote workstation (on the
5. In the field
Image display
Always on
Temporarily off
Permanently off
6. Click on
Save
Related topics:
Changing the time span of the input lock on page 37
Right for exclusive access to the console on page 38
.
KVM extender
.
.
General
if you want to configure the video operating mode of
CPU
CPU
module).
if you want to configure the video operating mode of
CON
CON
, select one of the following options:
The computer screen is displayed on both the
monitor of the active and the monitor of the
concurrent console (default).
The screen of this console (depending on the selection
made in step 4) is temporarily switched off whenever an
entry is made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, the screen is automatically switched on again.
The screen of this console (depending on the selection
made in step 4) is switched off permanently if an entry is
made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, you need to make an entry on this console to
switch on the screen again.
.
module).
G&D DP-Vision-IP-Fiber · 42
Configuration