Using As A Time Relay - Baumer NE210 Betriebsanleitung

Operating mode 1:
ON delay
Reset
Start, A
Stop, B
Preset
Zero
Output
Operating mode 2:
Drop-out delay
Reset
Start, A
Stop, B
Preset
Zero
Output
Downloaded from www.Manualslib.com
5.5 Using the counter as a time delay relay
Function Use of the counter as a time delay relay is established in program-
ming line 3. The four timescales are selected in programming line 9.
The four operating modes are selected in programming line 10. The
internal counting sequence takes place adding in all the operating
modes, irrespective of the positions of the DIP-switches.
Start input Track A in time delay relay mode
Stop output Track B in time delay relay mode
The values programmed in lines 1, 2 and 8 remain ineffective.
The diagrams below depict the output responses as a function of the
signal input.
Tv
Th
All the diagram patterns begin when the counter is switched on.
The reset signal completely resets a time delay relay cycle in
progress.
manuals search engine
Operating mode 3:
Hold time without discontinuation
Reset
Start, A
Stop, B
Preset
Zero
Output
Operating mode 4:
Hold time with discontinuation
Reset
Start, A
Stop, B
Preset
Zero
Output
www.baumer.com
NE210
Tv
Th
41