Machine And Tool Care; Accessories - Rothenberger ROWELD P160B Bedienungsanleitung

• Before every start-up, check the oil level of the hydraulic unit (oil level should lie between full
• Change hydraulic oil (HLP – 46, no.: 53649) every six months.
• To avoid malfunctions, regularly check the hydraulic unit for leaks, proper fit of connections
• Protect the fast-on couplings on both the hydraulic unit as well as the hydraulic hoses from
• The trimmer unit is equipped with two bi-directional blades. Rotate or replace blades
• Always ensure that the pipe and workpiece ends, in particular the butt surfaces are clean.
4.1
(Follow the maintenance instructions in item 4!)
Sharp and clean tools produce better work results and are safer.
Replace blunt, broken or lost parts immediately. Check whether the accessories are securely
connected to the machine.
Use only original spare parts from the manufacturer for maintenance work. Repairs must be
carried out only by professionally qualified personnel.
Disconnect the machine from the mains when it is not in use, prior to care and maintenance
work and before changing accessory parts.
Prior to reconnection to the mains, it must be ensured that the machine and the accessory tools
are switched off.
When extension cables are used, they must be checked for their safety and operativeness. Only
cables approved for outdoor use must be used.
Tools and machines whose housing or handles, especially those made of plastic, are cracked or
warped must not be used.
Dirt and moisture in such cracks conduct electric current. This can lead to an electric shock if the
insulation is damaged in the tools or in the machine.
Note: Furthermore, we refer to the accident prevention regulations.
5

Accessories

The relevant accessories and an order form can be found from Page 142 onwards.
6 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmentalfriendly disposal of
the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal authority.
For EU countries only:
26
Downloaded from www.Manualslib.com
and empty marks). Replenish hydraulic oil whenever necessary (HLP – 46, no.: 53649).
as well as the power cable for signs of damage or wear.
dirt and grime. Remove any dirt or foreign objects prior to connecting.
whenever trimming performance is no longer up to expectations.
Dirt or other foreign substances will shorten the serviceable life of the blades considerably
Pursuant to welding guidelines the welding machine must be inspected annually
by the manufacturer or an authorised service workshop. Machines subjected to
above average use or strain should be inspected at shorter intervals.

Machine and tool care

Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EC on waste electrical and electronic equipment and its implementation
as national law, electric tools that are no longer serviceable must be collected separately
and utilised for environmentally compatible recycling.
manuals search engine
ENGLISH