Kuppersberg RC 699 Technischer Pass Seite 40

TECHNICAL PASSPORT
Electric oven
Instructions for Removing the
Supports and Panels.
1. Remove the accessories from
inside the oven.
2. Ease out the supports (B), re-
leasing them from the bolt (C)
3. Undo the bolt (C), which
releases the flat catalytic panels.
40
4. To disassemble the back panel,
remove the Flat screw (D).
5. Proceed in reverse order to re-
assemble.
Caution
For your own safety, never switch
the oven on without the back panel that
protects the fan.
Cleaning the Oven Exterior
and Accessories
Clean the outside of the oven and
the accessories with warm soapy water
or with a mild detergent.
Caution
Never use metallic scouring pads or
commercial or scouring powders that
could scratch the enamel. For stainless
ENGLISH