Timer - Kuppersberg Rc 699 Technischer Pass

TECHNICAL PASSPORT
Electric oven

TIMER

Device control
The device can be controlled by the
push knob. The push knob can be used
for;
 Push ( Setting confirmation and
Menu switching ),
 Push and hold ( Switching to
manual mode ),
 Turn right ( Clock, alarm, cooking
settings ),
 Turn left ( Clock, alarm, cooking
settings ).
Power Up
Upon power up, the clock led flashes.
In this mode oven is inoperative.
Pushing the knob for about 3
seconds activates manual mode, the
clock led will turn off. Device will be in
stand-by mode.
30
Time Of Day Setting
Push the knob until the clock symbol
flashes to enter clock adjustment. Clock
setting is only allowed when no
alarm or cooking is adjusted.
The clock can be set by turning the
knob right or left. The last set clock will
be the current clock.
Alarm Setting
Push the knob until the ring symbol
flashes to enter alarm setting.
Alarm can be set by turning the knob
right or left.
After adjustment the knob needs
to be pushed to activate alarm. At this
menu if the knob is not being turned
ENGLISH