Kuppersberg RC 699 Technischer Pass Seite 31

ENGLISH
along 10 seconds, device switches to the
standby mode and alarm is cancelled.
On main screen, ring symbol will be
on if alarm is set.
Push and release the knob to see the
remaining time for alarm to end. Second
hand and minute hand will show the
set alarm time for a period of 2 seconds
and then will show the current time
again.
Push the knob for about 2 seconds
to cancel the set alarm.
Maximum alarm time is 3 hours.
Minimum alarm time is 2 minutes.
Timed Start Cooking Setting
Push and release the knob until the
start symbol flashes to enter timed start
cooking setting.
Cooking start time can be set by
turning the knob right or left.
At this menu if the knob is not
being turned along 10 seconds, device
switches to standby mode and alarm is
cancelled.
Cooking end time must also be set
after setting the cooking start time,
TECHNICAL PASSPORT
otherwise cooking start time will be
cancelled.
Maximum timed start cooking time
is current time + 12 hours.
Minimum timed start cooking time
is current time + 2 minutes.
Timed End Cooking Setting
Push and leave the knob until the
stop symbol flashses to enter timed end
cooking setting.
Cooking end time can be set by
turning the knob right or left.
After adjustment the knob needs
to be pushed to activate automatic
cooking. At
this menu if the knob is not being
turned along 10
switches to
standby mode and alarm is cancelled.
At this mode user sets the time when
cooking is going to finish.
Maximum timed end cooking time is
current time + 15 hours.
Minimum timed end cooking time is
current time + 2 minutes.
Electric oven
seconds, device
31