Charging; Standalone Usage Modes; Autostart Charging Mode - VESTEL EVC04 Serie Benutzerhandbuch

CHARGING

Your charging station is configured to be used in authorized charging mode by default. Check
authorized charging mode behavior details in below section.

1 - STANDALONE USAGE MODES

First usage of "Standalone Usage" mode charger: Your charger's master RFID card is already
registered to your charger and you can find the master RFID card in accessories. When your
charger is powered in the first time, it opens in "onboarding" screens as shown figure below. If you
do not make any configuration in onboarding screens for 60 seconds and connect your charging
cable, your charging station starts in autostart mode automatically.

1.1 - AUTOSTART CHARGING MODE

Your charging station behaves in autostart charging mode as mentioned below:
a) If you do not make any configuration in configuration mode for 60 seconds and con-
nect your charging cable, your charging station starts in autostart mode automatically.
b) If you delete the last RFID card from the local RFID card list, then your charger starts
to behave as autostart mode. (Detailly descriped in section 1.2.1.1 )
IB v7.3.0 2020 © 2020 Vestel - All rights reserved English - 13