Smart Application Authorized Mode (Optional With Wi-Fi); Configuring Drive Green Application; Drive Green Configuration - VESTEL EVC04 Serie Benutzerhandbuch

1.3 - SMART APPLICATION AUTHORIZED MODE (Optional with Wi-Fi)

1.3.1 – CONFIGURING DRIVE GREEN APPLICATION
In standalone usage mode, the master RFID card is already registered to your charger. If you tap
the master RFID card to your charging station when the charging cable is not connected, your
charger starts to make broadcasting over Bluetooth In this period of time, indication LED starts
to blink blue for 60 seconds. You can configure Drive Green application from your smartphone in
this period of time. If you do not make any configuration in 60 seconds, charging station exits from
configuration mode and returns to its previous mode.

1.3.2 DRIVE GREEN CONFIGURATION:

It is waited to start configuration from your smartphone within 60 seconds after the configuration
mode starts. If you do not make any configuration in 60 seconds, bluetooth broadcasting finishes
and configuration mode ends.
Please download "Drive Green" application from Android Play Store or IOS App Store.
You can reach to the application by QR code below.
Open Drive Green Mobile App. You will see selection of different models. To configure your charg-
er, select EVC04 screen shown in picture above and tab continue button and follow the instruc-
tions which are mentioned inside the application detailly to setup the charger and finish the con-
figuration.
IB v7.3.0 2020 © 2020 Vestel - All rights reserved English - 24