Rfid Authorized Mode; Registering User Rfid Card; Rfid List; Vehicle Connection & Charging - VESTEL EVC04 Serie Benutzerhandbuch

1.2 - RFID AUTHORIZED MODE

1.2.1 - REGISTERING USER RFID CARD

In standalone usage mode, the master RFID card is already registered to your charger. If you tap
the master RFID card to your charging station when the charging cable is not connected, your
charger starts to make broadcasting over Bluetooth and also in the same time you can add user
RFID card to the charger's local RFID list. In this period of time, indication LED starts to blink blue
for 60 seconds. You can add/delete your user RFID card. If you do not make any configuration in
60 seconds, charging station exists from configuration mode and returns to its previous mode.
1.2.1.1 - ADD/DELETE RFID CARD TO/FROM LOCAL RFID LIST:
As mentioned above, in configuration mode within 60 seconds, if you tap any user RFID card which
is not in Local RFID list, it is provided to add to the list. Similarly, if you tap the user RFID card which
was already added to the local RFID list before, then it is deleted from the list. If you delete the
last RFID card from the local RFID card list, then your charger starts to behave as autostart mode.
1.2.2 - VEHICLE CONNECTION & CHARGING

1.2.2.1 - SOCKET EQUIPPED MODEL

1.2.2.1.1 - VEHICLE CONNECTION & CHARGING
Model Without Display
1 - Ensure that your vehicle and the station is
ready for charging.
2 - Insert the charging plug to the vehicle
inlet and charging station socket outlet.
No LED Indication
IB v7.3.0 2020
No LED Indication
© 2020 Vestel - All rights reserved
Model With Display
1 - Ensure that your vehicle and the station is
ready for charging.
No LED Indication
2 - Insert the charging plug to the vehicle
inlet and charging station socket outlet.
No LED Indication
English - 18