Other Error Conditions - VESTEL EVC04 Serie Benutzerhandbuch

2 - OTHER ERROR CONDITIONS

Status Indicator
4 sec
NOTE : if you face a configuration problem in configuring your charger and smartphone please
be sure that the bluetooth range is less than 10 meters - stay inside the range.
NOTE : if you face a Wi-Fi connection problem in controlling the charger please restart your
router and check the connections.
IB v7.3.0 2020
Problem
Constant LED.
Even if the status
information LED
blinks in blue every
four seconds, it is
not possible to start
charging the electric
vehicle or to lock the
plug in the charging
station
The status
information LED
blinks in red
© 2020 Vestel - All rights reserved
Possible Causes
AC supply voltage may
not be in the range in
the operation manual,
grounding connection
may not be performed
and/or phase/neutral
connections may
be reversed or the
charging station may
have a fault.
The charging plug
may not be connected
properly to the
charging device or the
electric vehicle.
You shall see this
error notification
if your vehicle is
equipped with a
battery type that
requires ventilation.
Recommended
Solutions
Please ensure that
the voltage is in the
specified range
and that the
grounding connection
have been performed.
If the button is still
solid red, please
contact authorized
service.
Ensure that the
charging plug is
connected properly
on both
sides. Please check if
your electric vehicle is
in charging
mode.
This charging station
is not suitable to
charge such vehicles.
English - 49