Teuco HYDRO BASIC Gebrauchsanweisung Seite 9

STARTING THE HYDROMASSAGE
(BASIC E - BASIC G)
- When in standby mode, the panel is lit at low
intensity.
- To start the hydromassage function, press the
HYDRO key.
- The hydromassage will start up and the HYDRO
key will light up at high intensity and the SANITIZE
key will switch off.
- After 30 minutes, the hydromassage function will
switch off automatically.
- To stop the hydromassage, press the HYDRO
key again.
- The panel will return to standby mode.
- If the HYDRO key is flashing, this means
that there is not enough water in the tub. The
hydromassage will not work until the water level
is sufficient.
During hydromassage operation, it is possible to use the botanical cosmetic products made by Teuco.
Do not use soaps, bath oils or foaming products.
HYDRO BASIC
Downloaded from www.Manualslib.com manuals search engine
EN
30min.
9