Teuco HYDRO BASIC Gebrauchsanweisung Seite 10

EN
STARTING THE HYDROMASSAGE
(BASIC J)
- When in standby mode, the panel is lit at low
intensity.
- To start the hydromassage function, press the
HYDRO key.
- The hydromassage will start up and the HYDRO
key will light up at high intensity.
- After 30 minutes, the hydromassage function will
switch off automatically.
- To stop the hydromassage, press the HYDRO
key again.
- The panel will return to standby mode.
10
Downloaded from www.Manualslib.com
Never start the hydromassage function if the water in the tub does not cover the level of the jets –
Danger of breaking the system.
During hydromassage operation, it is possible to use the botanical cosmetic products made by Teuco.
Do not use soaps, bath oils or foaming products.
manuals search engine
30min.
HYDRO BASIC