Displaying The Screen Content Of The Signal Meter On The Pc Screen - Kathrein MSK 30 Gebrauchsanleitung

Operating the S.M.A.R.T. software
7.3 Displaying the screen content of the
signal meter on the PC screen
Using the S.M.A.R.T. application, it is possible to display the current screen content of the signal
meter on the PC screen and save it on the PC. To do so:
1. Under Tools , select the menu item Get Screen
or
click on
rent screen content of the signal meter on the PC
screen.
➯ The progress bar for the transfer of the screen con-
tent from the signal meter to the PC is being dis-
played (Fig. 15).
➯ After the transfer has been completed, the screen
content of the signal meter is displayed on the PC
screen in the S.M.A.R.T. interface (Fig. 16).
2. Select File ▶ Save as...▶ Open Mem to save the current
screen content in a *.bmp file
➯ A pop-up window for the storage location of the
*.bmp file appears
3. Select the storage location for the *.bmp file
10 of 24
in the top menu bar to display the cur-
Fig. 15: Acquiring the screen content
Fig. 16: The screen content has been
transferred